hygger Submersible Quick Water Change Pump with 2 Adaptors for Aquariums, Fountains, Ponds
- Submersible fountain water pump
- Aquarium water change
- Ultra quiet
- Circulation water pump
- Run-dry protection
- Easy to install and use
| Model | HG-919-800 | HG-919-1500 | HG-919-2500 | HG-919-4000 |
| Power | 18W | 40W | 60W | 90W |
| Weight | 405g | 795g | 1035g | 1890g |
| Qmax | 215GPH(800L/H) | 400GPH(1500L/H) | 660GPH(2500L/H) | 1060GPH(4000L/H) |
| Power Cord | 6FT(1.8m) | |||
| Dimensions | 3.8x3.6x4.4inches (9.6x9x11cm) |
5x4x5.7inches (12.7x10x14.5cm) |
5.7x4.4x6.3inches (14.5x11x16cm) |
6.7x5.3x7inches (17x13.5x17.8cm) |
| Voltage | 110-120V/60Hz, 220-240V/50Hz | |||
| Head Max | 5.3FT(1.6m) | 7.3FT(2.2m) | 10FT(3m) | 13.2FT(4m) |
Description
Partial Submersible
This pump do not require fully submerged. You can use it to pump water as long as water level surpass 1 inch height of the pump.
NOTE: Max Lift is a maximum height the water goes up, after connecting the water pipe to the nozzle. Max head data is based on ground level. If it used at sump tank, it won’t achieve listed head
Bottom Intake Design
Special bottom intake design, it can whisk away water to 1/4 inch from the water level and allows to pass 1/5 inch debris/fish waste.
A quick, convenient tool for aquarium cleaning and water transferring. 4 suction cups keep the pump stay in place. Clean the surface of where suction cups sticks, otherwise too slippery to keep it attached.
Magnet Driven Motor
Magnet drive motor and sealed housing greatly reduces the level of noise, as quiet as whisper.
Ideal for saltwater and freshwater aquariums, ponds, fountains, bird bath, hydroponic and filter systems.
Quick Water Change
Perfect solution for fast water change in cleaning. Much faster than manual siphon. Quick install in few minutes, connect water pump with adapter to hose, plug in power and ready to go
(PS: HOSE EXCLUDED).
Hygger submersible water pump makes aquarium water change a breeze.
Run dry protection
Water pump works as long as water submerged 1 inch height of the pump’s bottom. No need to be fully submersible.The protection circuit will gets hot and shut itself off if run dry. Once it cooling down, it runs again. Therefore, it is not auto shut off. You need to turn it off when not in use.
Bottom intake design
It can whisk away water to 1/4 inch from the water level and allows to pass 1/5 inch debris/fish waste.
Fast water change
Just in minutes, transfer water automatically, much faster than traditional manual siphon.
Quiet operation
Magnet drive motor and sealed housing greatly reduces the level of noise, as quiet as whisper.
Convenient carrying handle
6’ power cord and carrying handle makes it portable, convenient to use.
Versatile usage
Ideal for saltwater and freshwater aquariums, ponds, fountains, bird bath, hydroponic and filter systems.
APPLICATIONS
FRESHWATER SALTWATER AQUARIUM
Widely applies to freshwater or saltwater aquariums, ponds and other water change/water transfer application. Beside water change, another function of this water pump is to pumping fountain. Just enjoy the smoothing sound of the fountain flow. You can also use it as a sump pump to circulate aquarium water.
MAINTENANCE
Please rinse the pump under tap water right after cleaning the saltwater aquariums just in case rust.
Regular cleaning the water pump for longer service life and in case clogged and caused stopped working.
SUMP TANK PUMP
Besides water change, this water pump can be used as sump pump to circulate water.
TROUBLESHOOTING:
Make noises/ Stopped Working:
Possibly debris/food waste/leaves stuck inside the pump. Dissemble the pump and clean it all should solve the problem.