hygger Aquarium Wave Maker with Magnetic Mount Quiet Powerhead for Saltwater and Freshwater
- Increase Water Circulation
- Strong Magnetic Suction Base
- 360° Rotation
- Water Circulation
- Ceramic Shaft, Wear and Corrosion Resistant
| Item No. | HG021-3W | HG021-6W |
| Voltage | AC110-120V/60Hz AC220-240V/50Hz | AC110-120V/60Hz AC220-240V/50Hz |
| Cord Length | 5.9FT (1.8M) | 5.9FT (1.8M) |
| Dimension | 2.6x2.16x4.7" (6.5x5.5x12cm) | 2.6x2.16x5.7" (6.5x5.5x14. 5cm) |
| Application Tank Thickness | 4-10mm | 4-10mm |
| Application Tank | 5-20Gal | 20-105Gal |
| Q.Max | 530GPH(2000L) | 1056GPH(4000L) |
Description
Easy To Disassemble And Clean
Magnet Attachment Mount, Stable And Flexible
Step 1 Rotating a side magnet attachment. Then install the powerhead into the ball joint.
Step 2 Put the powerhead into the tank and closely tank wall.
The magnet is decent enough to stay securely on 4~10mm thick tank.
Step 3 Slide the magnetic holder slowly to fit together.
Do not directly overlap the inside and outside to prevent the glass from breaking.
Easy to move this unit around during operation without putting your hand into the aquarium water.
Attention: be careful your fingers when installing.
Place Wave Pump in Different Locations to Meet Different Needs
Agitate Water
Place the wave pump near the water surface to create a surge current in which adding oxygen to the water makes your fish thrive.
Circulation
It not only provides a natural current for corals and gives fish additional exercise but also circulates water for evenly heating.
Efficient Filtration
Adjust the powerhead down, and its water flow blows up debris pile up in the gravel and eventually be sucked into the filter.
